1) Message boards : ATLAS Application : ATLAS vbox and native 3.01 (Message 8105)
Posted 25 Jun 2023 by mikey
Post:
Looks like native tasks run well now, but I'm still ironing out a few issues with the vbox version.


I'm running Windows pc's mostly and they seem to returning Atlas 3.01 vbox tasks without any problems so far
2) Message boards : Sixtrack Application : Xtrack beam simulation (Message 8100)
Posted 13 Jun 2023 by mikey
Post:
I have an Xtrack ddicroce_test_test_3 task running right now on my Ryzen 9 3900X and it is currently at 7.25 days (626K seconds) of run time. it has been showing 100% progress for about two days now and is still running...

Edit: I just checked, and in fact it has been running so long that the server marked that task as failed because the result has not been reported yet.

https://lhcathomedev.cern.ch/lhcathome-dev/result.php?resultid=3218179


I'm seeing that too, no time to finish the tasks because the time estimates are soooo far off and the Server is just cancelling them, some while they are still running
3) Message boards : Sixtrack Application : Xtrack beam simulation (Message 8096)
Posted 11 Jun 2023 by mikey
Post:
Well I just got home for a Xtrack surprise

Run time 1 days 5 hours 9 min 46 sec X 4 and all Valid with Credits

I will try another batch if the server gives me any.

https://lhcathomedev.cern.ch/lhcathome-dev/result.php?resultid=3218930


I just finished a batch on one pc with each task taking 220K+ seconds each, and EVERY task validated!!! Now my wingman did the same task in ALOT less time but my pc is SLOW BUT they ARE validating if I just let them run!!!
4) Message boards : Sixtrack Application : Xtrack beam simulation (Message 8095)
Posted 9 Jun 2023 by mikey
Post:
I ran the 4 single core version tasks
Wish I would have got more to run since as usual there are none left so since this is on my 16 thread host I already changed the setting to get no limit and single core.


Okay thanks
5) Message boards : Sixtrack Application : Xtrack beam simulation (Message 8092)
Posted 9 Jun 2023 by mikey
Post:
Well I just got home for a Xtrack surprise

Run time 1 days 5 hours 9 min 46 sec X 4 and all Valid with Credits

I will try another batch if the server gives me any.

https://lhcathomedev.cern.ch/lhcathome-dev/result.php?resultid=3218930


You are 4 at a time or 4 cpu cores per task? I am running them 1 cpu core per task and 4 tasks at one time on this 16 core pc.
6) Message boards : Sixtrack Application : Xtrack beam simulation (Message 8089)
Posted 8 Jun 2023 by mikey
Post:
completed after about 2 day


Did the tasks jump to 100% at about 1.5 minutes and then finally finish after 2 days? Because I have been aborting tasks after 10 hours after they get to 100% after about 1.5 minutes.
7) Message boards : General Discussion : Xtrack beam simulation (Message 7928)
Posted 5 Mar 2023 by mikey
Post:
I was wondering why the server says that there are 12 In progress


Well I have 4 of them on my laptop that the cpu time is STILL increasing despite them saying that are just over 47 minutes they were at 100%, I suspended 2 of them, they are not taking alot of memory for each task, and the other 2 tasks are now at 21+ hours each and STILL GOING!! The cpu time IS increasing the the stderr file doesn't have anything fancy in it just task started
mikey


And almost 24 hours later they are STILL going!!! No checkpoints since the very beginning of the tasks but the seconds just keep on clicking by.
8) Message boards : General Discussion : Xtrack beam simulation (Message 7925)
Posted 5 Mar 2023 by mikey
Post:
I was wondering why the server says that there are 12 In progress


Well I have 4 of them on my laptop that the cpu time is STILL increasing despite them saying that are just over 47 minutes they were at 100%, I suspended 2 of them, they are not taking alot of memory for each task, and the other 2 tasks are now at 21+ hours each and STILL GOING!! The cpu time IS increasing the the stderr file doesn't have anything fancy in it just task started
mikey
9) Message boards : Theory Application : Theory v.5.21 (Message 7259)
Posted 4 Sep 2021 by mikey
Post:
For a better understanding you may look at the mcplots pages.
Mcplots is the backend system feeding LHC@home's Theory queue.
http://mcplots-dev.cern.ch/production.php?view=control

We are currently working with revision 2390, hence click on "coverage" of that line:
http://mcplots-dev.cern.ch/production.php?view=revision&rev=2390

"Runs summary" mentions a total of 70981 runs.
Each run represents a complex combination of an event generator and a set of input parameters and subroutines to be used.
To fulfil your request, each volunteer would have to select his preferred jobs out of a list with 70981 entries.
This selection table would have to be changed for every new revision and somebody would have to explain it.


The "Jobs run time" histogram and the data behind (click on the histogram):
It shows that by far the vast majority of jobs finish within a few hours (even minutes)


Unfortunately my tasks don't do that running 6 hours or more with the 9 day deadline increasing with every update. I am trying to catch them early but they often run for 3 or more hours with a completion percentage of around 0.655 percent with 9+ days, and increasing, remaining.

I am one of those people on the News who is between homes because they took the money out of the old one but the new one isn't finished being built yet. YES I absolutely would do it again, I'm currently saving over $1k per month and for 3 months was saving over $3k per month as I stayed in a timeshare for 90 days straight. BUT it means I'm on a couple of laptops and an older Mac desktop, and sometimes some Raspberry Pi's, so my crunching thru-put has been severely downgraded from 15+ desktops all with gaming level, albeit older now, gpus.

I appreciate the response and now understand the problems what I was asking for would create, I will just keep aborting them then until I get my next target and then move on to something less computationally intense until I can get my desktops back up and running again.
10) Message boards : Theory Application : Theory v.5.21 (Message 7257)
Posted 1 Sep 2021 by mikey
Post:
No it has been a while since getting one of those.
Longest I have got since last year are the 18 hour version and even the Sherpas have been running without that problem.

The Theory tasks have been the shorter ones and the longer ones have been CMS


I've been getting a bunch of the 9 day tasks lately and am still aborting them as this laptop just can't come close to finishing them on time. I wish they would let us choose the tasks types so I could avoid this as today I spent over 5 hours on one task, over 3 hours on another one and over 2 hours on 2 more of them, I am wasting their time and mine BUT at least they count toward my wuprop hours!!
11) Message boards : Theory Application : Theory v.5.21 (Message 7254)
Posted 26 Aug 2021 by mikey
Post:
pythia and sherpa still running



Are you still getting those 9 day tasks? I have been aborting them and only running the standard 2+ hours tasks.
12) Message boards : Theory Application : no tasks available? (Message 7251)
Posted 23 Aug 2021 by mikey
Post:
Since your machine has Windows OS, you can't run native tasks.
Try with native tasks not ticked.
Deselect also ATLAS long (only native) and BOINC VM (is not used) -> This is a LHC Test environment.


That worked, thank you very much!!!
13) Message boards : Theory Application : no tasks available? (Message 7248)
Posted 22 Aug 2021 by mikey
Post:
the Server Status says: Theory Simulation 362 40 0.95 (0.01 - 21.51)

yet when I ask for tasks I get this: 8/22/2021 6:50:01 PM | lhcathome-dev | No tasks are available for Theory Simulation

My preferences are:
Resource share 25
Use CPU
Use AMD GPU
Run only the selected applications CMS Simulation: no
Theory Simulation: yes
ATLAS Simulation: yes
Sixtrack Simulation: no
BOINC VM APP: yes
ATLAS very long simulation: yes
If no work for selected applications is available, accept work from other applications?
Run native if available?
Max # jobs No limit
Max # CPUs 4

Is there a disconnect between the Server Status page and what's actually available beyond the standard
60 minute cache setting?
14) Message boards : CMS Application : New Version 50.00 (Message 7186)
Posted 16 May 2021 by mikey
Post:
First investigations suggest that this is due to the condor jobs not matching VMs with more than one CPU, hence the familiar no jobs message. I'll need to get more specialists involved to find out when and why this changed -- it looks like it comes from the WMAgent side rather than CMS@home-dev itself


Thank you very much, so far 3.5 hours in, it's still working using a single cpu core, in the past using 4 cpu cores it would have errored out long before this. Fingers crossed it finishes in the next guesstimate of 9 hours.
15) Message boards : CMS Application : New Version 50.00 (Message 7176)
Posted 9 May 2021 by mikey
Post:
Hi Mikey

You just got one of those * [ERROR] No jobs were available to run*

Happens once in a while with the CMS , BUT I have to say that I have over 60 of these Valid in the last several months which is nice to see for me.

This is the *multicore version of 50.00* (vbox64_mt_mcore_cms) and the one over at LHC public is the single core 50.00

https://lhcathomedev.cern.ch/lhcathome-dev/results.php?hostid=3792

I have both versions running at the same time on this host and just the -dev version on my faster pc's with plenty of Ram

I usually only run the -dev version but when a few members said they had problems over there with CMS I decided to run a few and ALL of mine have been Valids so I don't know what their problem is other than the isp and maybe security.

The ones that I had crash were just because they had not got connected and running since it was on a laptop that I had a Zoom meeting running so that screwed things up.


I knew it was an MT task and I allowed it 4 cpu cores to run and it ran for a few minutes but then errored out like every other task I have had. I'm using Win10 and ver 6.18 of VBox but they all error out. I do have a couple of Linux laptops but they always say that VBox is not installed and won't even download a task, I need to work on that I guess. Next week I will have much better internet so I will try again then.
Thanks for your help
16) Message boards : CMS Application : New Version 50.00 (Message 7174)
Posted 8 May 2021 by mikey
Post:
https://lhcathomedev.cern.ch/lhcathome-dev/workunit.php?wuid=2048646

Pending


WOO HOO!!
17) Message boards : CMS Application : New Version 50.00 (Message 7173)
Posted 8 May 2021 by mikey
Post:
I'm sorry this is long but it's all I have, is the problem with my Win10 laptop and these tasks my crappy wifi?

output of stder.txt:

<core_client_version>7.16.11</core_client_version>
<![CDATA[
<message>
The ring 2 stack is in use.
(0xcf) - exit code 207 (0xcf)</message>
<stderr_txt>
2021-05-08 09:23:03 (2868): Detected: vboxwrapper 26197
2021-05-08 09:23:03 (2868): Detected: BOINC client v7.7
2021-05-08 09:23:04 (2868): Detected: VirtualBox VboxManage Interface (Version: 6.1.18)
2021-05-08 09:23:04 (2868): Detected: Heartbeat check (file: 'heartbeat' every 1200.000000 seconds)
2021-05-08 09:23:04 (2868): Successfully copied 'init_data.xml' to the shared directory.
2021-05-08 09:23:05 (2868): Create VM. (boinc_f63e846a4cf0a22f, slot#2)
2021-05-08 09:23:06 (2868): Setting Memory Size for VM. (3688MB)
2021-05-08 09:23:06 (2868): Setting CPU Count for VM. (3)
2021-05-08 09:23:06 (2868): Setting Chipset Options for VM.
2021-05-08 09:23:06 (2868): Setting Boot Options for VM.
2021-05-08 09:23:07 (2868): Setting Network Configuration for NAT.
2021-05-08 09:23:07 (2868): Enabling VM Network Access.
2021-05-08 09:23:07 (2868): Disabling USB Support for VM.
2021-05-08 09:23:08 (2868): Disabling COM Port Support for VM.
2021-05-08 09:23:08 (2868): Disabling LPT Port Support for VM.
2021-05-08 09:23:08 (2868): Disabling Audio Support for VM.
2021-05-08 09:23:08 (2868): Disabling Clipboard Support for VM.
2021-05-08 09:23:09 (2868): Disabling Drag and Drop Support for VM.
2021-05-08 09:23:09 (2868): Adding storage controller(s) to VM.
2021-05-08 09:23:09 (2868): Adding virtual disk drive to VM. (vm_image.vdi)
2021-05-08 09:23:09 (2868): Adding VirtualBox Guest Additions to VM.
2021-05-08 09:23:10 (2868): Adding network bandwidth throttle group to VM. (Defaulting to 1024GB)
2021-05-08 09:23:10 (2868): forwarding host port 63086 to guest port 80
2021-05-08 09:23:10 (2868): Enabling remote desktop for VM.
2021-05-08 09:23:10 (2868): Required extension pack not installed, remote desktop not enabled.
2021-05-08 09:23:10 (2868): Enabling shared directory for VM.
2021-05-08 09:23:11 (2868): Starting VM using VBoxManage interface. (boinc_f63e846a4cf0a22f, slot#2)
2021-05-08 09:23:15 (2868): Successfully started VM. (PID = '12300')
2021-05-08 09:23:15 (2868): Reporting VM Process ID to BOINC.
2021-05-08 09:23:15 (2868): Guest Log: BIOS: VirtualBox 6.1.18

2021-05-08 09:23:15 (2868): Guest Log: CPUID EDX: 0x178bfbff

2021-05-08 09:23:15 (2868): Guest Log: BIOS: ata0-0: PCHS=16383/16/63 LCHS=1024/255/63

2021-05-08 09:23:15 (2868): VM state change detected. (old = 'PoweredOff', new = 'Running')
2021-05-08 09:23:15 (2868): Detected: Web Application Enabled (http://localhost:63086)
2021-05-08 09:23:15 (2868): Preference change detected
2021-05-08 09:23:15 (2868): Setting CPU throttle for VM. (90%)
2021-05-08 09:23:15 (2868): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 900 seconds) or (Vbox_job.xml: 600 seconds))
2021-05-08 09:23:17 (2868): Guest Log: BIOS: Boot : bseqnr=1, bootseq=0032

2021-05-08 09:23:17 (2868): Guest Log: BIOS: Booting from Hard Disk...

2021-05-08 09:23:20 (2868): Guest Log: BIOS: KBD: unsupported int 16h function 03

2021-05-08 09:23:20 (2868): Guest Log: BIOS: AX=0305 BX=0000 CX=0000 DX=0000

2021-05-08 09:23:36 (2868): Guest Log: vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds

2021-05-08 09:23:36 (2868): Guest Log: vboxguest: misc device minor 56, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)

2021-05-08 09:24:07 (2868): Guest Log: VBoxService 5.2.6 r120293 (verbosity: 0) linux.amd64 (Jan 15 2018 14:51:00) release log

2021-05-08 09:24:07 (2868): Guest Log: 00:00:00.000144 main Log opened 2021-05-08T13:24:06.939445000Z

2021-05-08 09:24:07 (2868): Guest Log: 00:00:00.000343 main OS Product: Linux

2021-05-08 09:24:07 (2868): Guest Log: 00:00:00.000381 main OS Release: 4.14.157-17.cernvm.x86_64

2021-05-08 09:24:07 (2868): Guest Log: 00:00:00.000409 main OS Version: #1 SMP Wed Dec 4 17:26:45 CET 2019

2021-05-08 09:24:07 (2868): Guest Log: 00:00:00.000436 main Executable: /usr/share/vboxguest52/usr/sbin/VBoxService

2021-05-08 09:24:07 (2868): Guest Log: 00:00:00.000436 main Process ID: 3035

2021-05-08 09:24:07 (2868): Guest Log: 00:00:00.000437 main Package type: LINUX_64BITS_GENERIC

2021-05-08 09:24:07 (2868): Guest Log: 00:00:00.001616 main 5.2.6 r120293 started. Verbose level = 0

2021-05-08 09:24:24 (2868): Guest Log: [INFO] Mounting the shared directory

2021-05-08 09:24:24 (2868): Guest Log: [INFO] Shared directory mounted, enabling vboxmonitor

2021-05-08 09:24:24 (2868): Guest Log: [DEBUG] Testing network connection to cern.ch on port 80

2021-05-08 09:24:25 (2868): Guest Log: [DEBUG] Connection to cern.ch 80 port [tcp/http] succeeded!

2021-05-08 09:24:25 (2868): Guest Log: [DEBUG] 0

2021-05-08 09:24:25 (2868): Guest Log: [DEBUG] Testing VCCS connection to vccs.cern.ch on port 443

2021-05-08 09:24:25 (2868): Guest Log: [DEBUG] Connection to vccs.cern.ch 443 port [tcp/https] succeeded!

2021-05-08 09:24:25 (2868): Guest Log: [DEBUG] 0

2021-05-08 09:24:25 (2868): Guest Log: [DEBUG] Testing connection to Condor server on port 9618

2021-05-08 09:24:25 (2868): Guest Log: [DEBUG] Connection to vocms0840.cern.ch 9618 port [tcp/condor] succeeded!

2021-05-08 09:24:25 (2868): Guest Log: [DEBUG] 0

2021-05-08 09:24:25 (2868): Guest Log: [DEBUG] Testing connection to WMAgent server on port 4080

2021-05-08 09:24:26 (2868): Guest Log: [DEBUG] Connection to vocms0267.cern.ch 4080 port [tcp/lorica-in] succeeded!

2021-05-08 09:24:26 (2868): Guest Log: [DEBUG] 0

2021-05-08 09:24:26 (2868): Guest Log: [DEBUG] Testing connection to Frontier server on port 8080

2021-05-08 09:24:26 (2868): Guest Log: [DEBUG] Connection to cms-frontier.openhtc.io 8080 port [tcp/webcache] succeeded!

2021-05-08 09:24:26 (2868): Guest Log: [DEBUG] 0

2021-05-08 09:24:27 (2868): Guest Log: [INFO] CVMFS and Frontier will use DIRECT instead of an HTTP proxy.

2021-05-08 09:24:27 (2868): Guest Log: [INFO] A local HTTP proxy could help making the network usage

2021-05-08 09:24:27 (2868): Guest Log: [INFO] of this application more efficient. It would also help to

2021-05-08 09:24:27 (2868): Guest Log: [INFO] offload the project servers.

2021-05-08 09:24:27 (2868): Guest Log: [INFO] Details can be found in the project forum.

2021-05-08 09:24:34 (2868): Guest Log: [INFO] Reloading the CVMFS configuration (can take a while) ...

2021-05-08 09:25:43 (2868): Guest Log: [INFO] Probing CVMFS ...

2021-05-08 09:25:50 (2868): Guest Log: VERSION PID UPTIME(M) MEM(K) REVISION EXPIRES(M) NOCATALOGS CACHEUSE(K) CACHEMAX(K) NOFDUSE NOFDMAX NOIOERR NOOPEN HITRATE(%) RX(K) SPEED(K/S) HOST PROXY ONLINE

2021-05-08 09:25:50 (2868): Guest Log: 2.4.4.0 3815 1 26124 15129 3 1 1243096 4096000 2 65024 0 2 100 0 0 http://s1cern-cvmfs.openhtc.io/cvmfs/grid.cern.ch DIRECT 1

2021-05-08 09:26:06 (2868): Guest Log: [INFO] Reading volunteer information

2021-05-08 09:26:06 (2868): Guest Log: [INFO] Volunteer: mikey (419)

2021-05-08 09:26:06 (2868): Guest Log: [INFO] VMID: 49b2fac1-df25-48d2-a4ee-4612ca6a31f8

2021-05-08 09:26:06 (2868): Guest Log: [INFO] Requesting an X509 credential from LHC@home

2021-05-08 09:26:07 (2868): Guest Log: [INFO] Requesting an X509 credential from vLHC@home-dev

2021-05-08 09:26:09 (2868): Guest Log: [INFO] Running the fast benchmark.

2021-05-08 09:27:23 (2868): Guest Log: [INFO] Machine performance 20.27 HEPSPEC06

2021-05-08 09:27:23 (2868): Guest Log: [INFO] CMS application starting. Check log files.

2021-05-08 09:27:24 (2868): Guest Log: [DEBUG] HTCondor ping

2021-05-08 09:27:26 (2868): Guest Log: [DEBUG] 0

2021-05-08 09:28:11 (2868): VM state change detected. (old = 'Running', new = 'Paused')
2021-05-08 09:28:19 (2868): VM state change detected. (old = 'Paused', new = 'Running')
2021-05-08 09:28:21 (2868): VM state change detected. (old = 'Running', new = 'Paused')
2021-05-08 09:28:41 (2868): VM state change detected. (old = 'Paused', new = 'Running')
2021-05-08 09:38:44 (2868): Guest Log: Did the tarball get created?

2021-05-08 09:38:44 (2868): Guest Log: /tmp/CMS_2647666_1619986436.227913_0.tgz

2021-05-08 09:38:44 (2868): Guest Log: Here is the upload output

2021-05-08 09:38:44 (2868): Guest Log: Here is the upload error

2021-05-08 09:38:44 (2868): Guest Log: Here is the condor directory

2021-05-08 09:38:44 (2868): Guest Log: MasterLog

2021-05-08 09:38:44 (2868): Guest Log: ProcLog

2021-05-08 09:38:44 (2868): Guest Log: StarterLog

2021-05-08 09:38:44 (2868): Guest Log: StartLog

2021-05-08 09:38:44 (2868): Guest Log: XferStatsLog

2021-05-08 09:38:44 (2868): Guest Log: Here is the MasterLog

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:26 ******************************************************

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:26 ** condor_master (CONDOR_MASTER) STARTING UP

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:26 ** /usr/sbin/condor_master

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:26 ** SubsystemInfo: name=MASTER type=MASTER(2) class=DAEMON(1)

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:26 ** Configuration: subsystem:MASTER local:<NONE> class:DAEMON

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:26 ** $CondorVersion: 8.6.10 Mar 12 2018 BuildID: 435200 $

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:26 ** $CondorPlatform: x86_64_RedHat6 $

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:26 ** PID = 10784

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:26 ** Log last touched time unavailable (No such file or directory)

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:26 ******************************************************

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:26 Using config source: /etc/condor/condor_config

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:26 Using local config sources:

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:26 /etc/condor/config.d/10_security.config

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:26 /etc/condor/config.d/14_network.config

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:26 /etc/condor/config.d/20_workernode.config

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:26 /etc/condor/config.d/30_lease.config

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:26 /etc/condor/config.d/35_cms.config

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:26 /etc/condor/config.d/40_ccb.config

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:26 /etc/condor/config.d/62-benchmark.conf

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:26 /etc/condor/condor_config.local

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:26 config Macros = 173, Sorted = 173, StringBytes = 6803, TablesBytes = 6332

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:26 CLASSAD_CACHING is OFF

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:26 Daemon Log is logging: D_ALWAYS D_ERROR

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:26 Daemoncore: Listening at <10.0.2.15:46425> on TCP (ReliSock).

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:26 DaemonCore: command socket at <10.0.2.15:46425?addrs=10.0.2.15-46425&noUDP>

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:26 DaemonCore: private command socket at <10.0.2.15:46425?addrs=10.0.2.15-46425>

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 CCBListener: registered with CCB server vocms0840.cern.ch as ccbid 137.138.156.85:9618?addrs=137.138.156.85-9618+[2001-1458-d00-14--b3]-9618#823960

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 Master restart (GRACEFUL) is watching /usr/sbin/condor_master (mtime:1520893905)

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 Started DaemonCore process "/usr/sbin/condor_startd", pid and pgroup = 13715

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:45 Setting ready state 'Ready' for STARTD

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 Got SIGTERM. Performing graceful shutdown.

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 Sent SIGTERM to STARTD (pid 13715)

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 AllReaper unexpectedly called on pid 13715, status 0.

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 The STARTD (pid 13715) exited with status 0

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 All daemons are gone. Exiting.

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 **** condor_master (condor_MASTER) pid 10784 EXITING WITH STATUS 0

2021-05-08 09:38:44 (2868): Guest Log: Here is the KernelTuning.log

2021-05-08 09:38:44 (2868): Guest Log: Here is the StartLog

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 ******************************************************

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 ** condor_startd (CONDOR_STARTD) STARTING UP

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 ** /usr/sbin/condor_startd

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 ** SubsystemInfo: name=STARTD type=STARTD(7) class=DAEMON(1)

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 ** Configuration: subsystem:STARTD local:<NONE> class:DAEMON

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 ** $CondorVersion: 8.6.10 Mar 12 2018 BuildID: 435200 $

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 ** $CondorPlatform: x86_64_RedHat6 $

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 ** PID = 13715

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 ** Log last touched time unavailable (No such file or directory)

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 ******************************************************

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 Using config source: /etc/condor/condor_config

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 Using local config sources:

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 /etc/condor/config.d/10_security.config

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 /etc/condor/config.d/14_network.config

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 /etc/condor/config.d/20_workernode.config

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 /etc/condor/config.d/30_lease.config

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 /etc/condor/config.d/35_cms.config

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 /etc/condor/config.d/40_ccb.config

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 /etc/condor/config.d/62-benchmark.conf

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 /etc/condor/condor_config.local

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 config Macros = 174, Sorted = 174, StringBytes = 6830, TablesBytes = 6368

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 CLASSAD_CACHING is ENABLED

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 Daemon Log is logging: D_ALWAYS D_ERROR

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 Daemoncore: Listening at <10.0.2.15:43253> on TCP (ReliSock).

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 DaemonCore: command socket at <10.0.2.15:43253?addrs=10.0.2.15-43253&noUDP>

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:36 DaemonCore: private command socket at <10.0.2.15:43253?addrs=10.0.2.15-43253>

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:41 CCBListener: registered with CCB server vocms0840.cern.ch as ccbid 137.138.156.85:9618?addrs=137.138.156.85-9618+[2001-1458-d00-14--b3]-9618#823961

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 VM-gahp server reported an internal error

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 VM universe will be tested to check if it is available

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 History file rotation is enabled.

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 Maximum history file size is: 20971520 bytes

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 Number of rotated history files is: 2

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 Allocating auto shares for slot type 0: Cpus: auto, Memory: auto, Swap: auto, Disk: auto

2021-05-08 09:38:44 (2868): Guest Log: slot type 0: Cpus: 1.000000, Memory: 2000, Swap: 33.33%, Disk: 33.33%

2021-05-08 09:38:44 (2868): Guest Log: slot type 0: Cpus: 1.000000, Memory: 2000, Swap: 33.33%, Disk: 33.33%

2021-05-08 09:38:44 (2868): Guest Log: slot type 0: Cpus: 1.000000, Memory: 2000, Swap: 33.33%, Disk: 33.33%

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 slot1: New machine resource allocated

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 Setting up slot pairings

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 slot2: New machine resource allocated

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 Setting up slot pairings

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 slot3: New machine resource allocated

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 Setting up slot pairings

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 CronJobList: Adding job 'multicore'

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 CronJob: Initializing job 'multicore' (/usr/local/bin/multicore-shutdown)

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 CronJobList: Adding job 'mips'

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 CronJobList: Adding job 'kflops'

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 CronJob: Initializing job 'mips' (/usr/libexec/condor/condor_mips)

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 CronJob: Initializing job 'kflops' (/usr/libexec/condor/condor_kflops)

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 slot1: State change: IS_OWNER is false

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 slot1: Changing state: Owner -> Unclaimed

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 State change: RunBenchmarks is TRUE

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 slot1: Changing activity: Idle -> Benchmarking

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 BenchMgr:StartBenchmarks()

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 slot2: State change: IS_OWNER is false

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 slot2: Changing state: Owner -> Unclaimed

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 State change: RunBenchmarks is TRUE

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 slot2: Changing activity: Idle -> Benchmarking

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 slot2: Changing activity: Benchmarking -> Idle

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 slot3: State change: IS_OWNER is false

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 slot3: Changing state: Owner -> Unclaimed

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 State change: RunBenchmarks is TRUE

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 slot3: Changing activity: Idle -> Benchmarking

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:42 slot3: Changing activity: Benchmarking -> Idle

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:45 Initial update sent to collector(s)

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:27:45 Sending DC_SET_READY message to master <10.0.2.15:46425?addrs=10.0.2.15-46425>

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:28:04 State change: benchmarks completed

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:28:04 slot1: Changing activity: Benchmarking -> Idle

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 No resources have been claimed for 600 seconds

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 Shutting down Condor on this machine.

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 Got SIGTERM. Performing graceful shutdown.

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 shutdown graceful

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 Cron: Killing all jobs

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 Killing job multicore

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 Cron: Killing all jobs

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 Killing job mips

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 Killing job kflops

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 Deleting cron job manager

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 Cron: Killing all jobs

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 Killing job multicore

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 Cron: Killing all jobs

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 Killing job multicore

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 CronJobList: Deleting all jobs

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 CronJobList: Deleting job 'multicore'

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 CronJob: Deleting job 'multicore' (/usr/local/bin/multicore-shutdown), timer 9

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 Cron: Killing all jobs

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 CronJobList: Deleting all jobs

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 Deleting benchmark job mgr

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 Cron: Killing all jobs

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 Killing job mips

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 Killing job kflops

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 Cron: Killing all jobs

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 Killing job mips

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 Killing job kflops

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 CronJobList: Deleting all jobs

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 CronJobList: Deleting job 'mips'

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 CronJob: Deleting job 'mips' (/usr/libexec/condor/condor_mips), timer -1

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 CronJobList: Deleting job 'kflops'

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 CronJob: Deleting job 'kflops' (/usr/libexec/condor/condor_kflops), timer -1

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 Cron: Killing all jobs

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 CronJobList: Deleting all jobs

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 All resources are free, exiting.

2021-05-08 09:38:44 (2868): Guest Log: 05/08/21 09:38:12 **** condor_startd (condor_STARTD) pid 13715 EXITING WITH STATUS 0

2021-05-08 09:38:44 (2868): Guest Log: [ERROR] No jobs were available to run.

2021-05-08 09:38:44 (2868): Guest Log: [INFO] Shutting Down.

2021-05-08 09:38:44 (2868): VM Completion File Detected.
2021-05-08 09:38:44 (2868): VM Completion Message: No jobs were available to run.
.
2021-05-08 09:38:44 (2868): Powering off VM.
2021-05-08 09:43:45 (2868): VM did not power off when requested.
2021-05-08 09:43:45 (2868): VM was successfully terminated.
2021-05-08 09:43:45 (2868): Deregistering VM. (boinc_f63e846a4cf0a22f, slot#2)
2021-05-08 09:43:45 (2868): Removing network bandwidth throttle group from VM.
2021-05-08 09:43:45 (2868): Removing VM from VirtualBox.
09:43:51 (2868): called boinc_finish(207)

</stderr_txt>
]]>



©2024 CERN