| Name | X4PLDm4Fkh8n7OlckoGmwREmGgkVDo1bjSoqJKNTDm8BFKDmtgF0Rm_0 |
| Workunit | 2634325 |
| Created | 24 Nov 2025, 11:50:13 UTC |
| Sent | 25 Nov 2025, 6:32:00 UTC |
| Report deadline | 2 Dec 2025, 6:32:00 UTC |
| Received | 25 Nov 2025, 13:10:03 UTC |
| Server state | Over |
| Outcome | Computation error |
| Client state | Cancelled by server |
| Exit status | 202 (0x000000CA) EXIT_ABORTED_BY_PROJECT |
| Computer ID | 4984 |
| Run time | 6 hours 36 min 29 sec |
| CPU time | 4 min 53 sec |
| Validate state | Invalid |
| Credit | 0.00 |
| Device peak FLOPS | 17.28 GFLOPS |
| Application version | ATLAS Simulation v3.03 (vbox64_mt_mcore_atlas) windows_x86_64 |
| Peak working set size | 60.57 MB |
| Peak swap size | 52.98 MB |
| Peak disk usage | 274.97 MB |
Stderr output
<core_client_version>7.22.2</core_client_version>
<![CDATA[
<message>
aborted by project - no longer usable</message>
<stderr_txt>
2025-11-25 06:32:26 (10304): vboxwrapper version 26208
2025-11-25 06:32:26 (10304): BOINC client version: 7.22.2
2025-11-25 06:32:26 (10304): Detected: VirtualBox VboxManage Interface (Version: 7.1.6)
2025-11-25 06:32:27 (10304): Successfully copied 'init_data.xml' to the shared directory.
2025-11-25 06:32:27 (10304): Create VM. (boinc_4151cb3aa7d30999, slot#10)
2025-11-25 06:32:28 (10304): Setting Memory Size for VM. (4400MB)
2025-11-25 06:32:28 (10304): Setting CPU Count for VM. (4)
2025-11-25 06:32:28 (10304): Setting Chipset Options for VM.
2025-11-25 06:32:28 (10304): Setting Graphics Controller Options for VM.
2025-11-25 06:32:29 (10304): Setting Boot Options for VM.
2025-11-25 06:32:29 (10304): Setting Network Configuration for NAT.
2025-11-25 06:32:29 (10304): Enabling VM Network Access.
2025-11-25 06:32:29 (10304): Disabling USB Support for VM.
2025-11-25 06:32:30 (10304): Disabling COM Port Support for VM.
2025-11-25 06:32:30 (10304): Disabling LPT Port Support for VM.
2025-11-25 06:32:30 (10304): Disabling Audio Support for VM.
2025-11-25 06:32:30 (10304): Disabling Clipboard Support for VM.
2025-11-25 06:32:31 (10304): Disabling Drag and Drop Support for VM.
2025-11-25 06:32:31 (10304): Adding storage controller(s) to VM.
2025-11-25 06:32:31 (10304): Adding virtual disk drive to VM. (ATLAS_vbox_3.03_image.vdi)
2025-11-25 06:32:33 (10304): Adding VirtualBox Guest Additions to VM.
2025-11-25 06:32:34 (10304): Adding network bandwidth throttle group to VM. (Defaulting to 1024GB)
2025-11-25 06:32:34 (10304): forwarding host port 62033 to guest port 80
2025-11-25 06:32:34 (10304): Enabling remote desktop for VM.
2025-11-25 06:32:34 (10304): Required extension pack not installed, remote desktop not enabled.
2025-11-25 06:32:34 (10304): Enabling shared directory for VM.
2025-11-25 06:32:35 (10304): Starting VM using VBoxManage interface. (boinc_4151cb3aa7d30999, slot#10)
2025-11-25 06:32:42 (10304): Successfully started VM. (PID = '8952')
2025-11-25 06:32:42 (10304): Reporting VM Process ID to BOINC.
2025-11-25 06:32:42 (10304): Guest Log: BIOS: VirtualBox 7.1.6
2025-11-25 06:32:42 (10304): Guest Log: CPUID EDX: 0x178bfbff
2025-11-25 06:32:42 (10304): Guest Log: BIOS: No PCI IDE controller, not probing IDE
2025-11-25 06:32:42 (10304): Guest Log: BIOS: AHCI 0-P#0: PCHS=16383/16/63 LCHS=1024/255/2 0x0000000002800000 sectors
2025-11-25 06:32:42 (10304): VM state change detected. (old = 'poweredoff', new = 'running')
2025-11-25 06:32:42 (10304): Detected: Web Application Enabled (http://localhost:62033)
2025-11-25 06:32:42 (10304): Preference change detected
2025-11-25 06:32:42 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 06:32:42 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 06:32:44 (10304): Guest Log: BIOS: Boot : bseqnr=1, bootseq=0032
2025-11-25 06:32:44 (10304): Guest Log: BIOS: Booting from Hard Disk...
2025-11-25 06:32:53 (10304): Guest Log: BIOS: KBD: unsupported int 16h function 03
2025-11-25 06:32:53 (10304): Guest Log: BIOS: AX=0305 BX=0000 CX=0000 DX=0000
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk_ext: function 41, unmapped device for ELDL=81
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk: function 02, unmapped device for ELDL=81
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk_ext: function 41, unmapped device for ELDL=82
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk: function 02, unmapped device for ELDL=82
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk_ext: function 41, unmapped device for ELDL=83
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk: function 02, unmapped device for ELDL=83
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk_ext: function 41, unmapped device for ELDL=84
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk: function 02, unmapped device for ELDL=84
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk_ext: function 41, unmapped device for ELDL=85
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk: function 02, unmapped device for ELDL=85
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk_ext: function 41, unmapped device for ELDL=86
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk: function 02, unmapped device for ELDL=86
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk_ext: function 41, unmapped device for ELDL=87
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk: function 02, unmapped device for ELDL=87
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk_ext: function 41, unmapped device for ELDL=88
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk: function 02, unmapped device for ELDL=88
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk_ext: function 41, unmapped device for ELDL=89
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk: function 02, unmapped device for ELDL=89
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk_ext: function 41, unmapped device for ELDL=8a
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk: function 02, unmapped device for ELDL=8a
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk_ext: function 41, unmapped device for ELDL=8b
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk: function 02, unmapped device for ELDL=8b
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk_ext: function 41, unmapped device for ELDL=8c
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk: function 02, unmapped device for ELDL=8c
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk_ext: function 41, unmapped device for ELDL=8d
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk: function 02, unmapped device for ELDL=8d
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk_ext: function 41, unmapped device for ELDL=8e
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk: function 02, unmapped device for ELDL=8e
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk_ext: function 41, unmapped device for ELDL=8f
2025-11-25 06:32:53 (10304): Guest Log: int13_harddisk: function 02, unmapped device for ELDL=8f
2025-11-25 06:32:57 (10304): Guest Log: vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds
2025-11-25 06:32:57 (10304): Guest Log: Host supports full mouse state reporting, switching to extended mouse integration protocol
2025-11-25 06:32:57 (10304): Guest Log: vboxguest: Successfully loaded version 7.1.4 r165100
2025-11-25 06:32:57 (10304): Guest Log: vboxguest: misc device minor 123, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
2025-11-25 06:33:03 (10304): Guest Log: 06:33:00.351522 main VBoxService 7.1.4 r165100 (verbosity: 0) linux.amd64 (Oct 10 2024 19:26:29) release log
2025-11-25 06:33:03 (10304): Guest Log: 06:33:00.351525 main Log opened 2025-11-25T06:33:00.351514000Z
2025-11-25 06:33:03 (10304): Guest Log: 06:33:00.351672 main OS Product: Linux
2025-11-25 06:33:03 (10304): Guest Log: 06:33:00.351725 main OS Release: 5.14.0-503.14.1.el9_5.x86_64
2025-11-25 06:33:03 (10304): Guest Log: 06:33:00.351817 main OS Version: #1 SMP PREEMPT_DYNAMIC Tue Nov 19 21:25:22 EST 2024
2025-11-25 06:33:03 (10304): Guest Log: 06:33:00.351866 main Executable: /opt/VBoxGuestAdditions-7.1.4/sbin/VBoxService
2025-11-25 06:33:03 (10304): Guest Log: 06:33:00.351867 main Process ID: 936
2025-11-25 06:33:03 (10304): Guest Log: 06:33:00.351868 main Package type: LINUX_64BITS_GENERIC
2025-11-25 06:33:03 (10304): Guest Log: 06:33:00.367761 main 7.1.4 r165100 started. Verbose level = 0
2025-11-25 06:33:03 (10304): Guest Log: 06:33:00.370690 main vbglR3GuestCtrlDetectPeekGetCancelSupport: Supported (#1)
2025-11-25 06:43:21 (10304): Preference change detected
2025-11-25 06:43:21 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 06:43:21 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 06:43:43 (10304): Preference change detected
2025-11-25 06:43:43 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 06:43:43 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 06:47:30 (10304): Preference change detected
2025-11-25 06:47:30 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 06:47:30 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 06:53:27 (10304): Preference change detected
2025-11-25 06:53:27 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 06:53:27 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 07:01:44 (10304): Preference change detected
2025-11-25 07:01:44 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 07:01:45 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 07:21:12 (10304): Preference change detected
2025-11-25 07:21:12 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 07:21:12 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 07:21:24 (10304): Preference change detected
2025-11-25 07:21:24 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 07:21:24 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 07:21:36 (10304): Preference change detected
2025-11-25 07:21:36 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 07:21:36 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 07:24:05 (10304): Preference change detected
2025-11-25 07:24:05 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 07:24:05 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 07:28:31 (10304): Preference change detected
2025-11-25 07:28:31 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 07:28:32 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 07:36:28 (10304): Preference change detected
2025-11-25 07:36:28 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 07:36:28 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 07:44:33 (10304): Preference change detected
2025-11-25 07:44:33 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 07:44:33 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 07:44:44 (10304): Preference change detected
2025-11-25 07:44:44 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 07:44:44 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 07:44:55 (10304): Preference change detected
2025-11-25 07:44:55 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 07:44:55 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 07:52:13 (10304): Preference change detected
2025-11-25 07:52:13 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 07:52:13 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 07:52:37 (10304): Preference change detected
2025-11-25 07:52:37 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 07:52:37 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 07:54:26 (10304): Preference change detected
2025-11-25 07:54:26 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 07:54:26 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 07:54:48 (10304): Preference change detected
2025-11-25 07:54:48 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 07:54:48 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 08:12:45 (10304): Status Report: Elapsed Time: '6000.000000'
2025-11-25 08:12:45 (10304): Status Report: CPU Time: '103.968750'
2025-11-25 08:13:11 (10304): Preference change detected
2025-11-25 08:13:11 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 08:13:11 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 08:13:22 (10304): Preference change detected
2025-11-25 08:13:22 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 08:13:22 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 08:28:54 (10304): Preference change detected
2025-11-25 08:28:54 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 08:28:54 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 08:29:41 (10304): Preference change detected
2025-11-25 08:29:41 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 08:29:41 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 08:35:22 (10304): Preference change detected
2025-11-25 08:35:22 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 08:35:23 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 09:27:23 (10304): Preference change detected
2025-11-25 09:27:23 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 09:27:23 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 09:27:35 (10304): Preference change detected
2025-11-25 09:27:35 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 09:27:35 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 09:29:17 (10304): Preference change detected
2025-11-25 09:29:17 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 09:29:17 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 09:31:00 (10304): Preference change detected
2025-11-25 09:31:00 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 09:31:00 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 09:31:24 (10304): Preference change detected
2025-11-25 09:31:24 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 09:31:24 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 09:37:46 (10304): Preference change detected
2025-11-25 09:37:46 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 09:37:47 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 09:46:15 (10304): Preference change detected
2025-11-25 09:46:15 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 09:46:15 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 09:48:21 (10304): Preference change detected
2025-11-25 09:48:21 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 09:48:21 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 09:50:58 (10304): Preference change detected
2025-11-25 09:50:58 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 09:50:58 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 09:52:48 (10304): Status Report: Elapsed Time: '12000.000000'
2025-11-25 09:52:48 (10304): Status Report: CPU Time: '168.015625'
2025-11-25 10:24:33 (10304): Preference change detected
2025-11-25 10:24:33 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 10:24:33 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 10:29:41 (10304): Preference change detected
2025-11-25 10:29:41 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 10:29:41 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 10:36:01 (10304): Preference change detected
2025-11-25 10:36:01 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 10:36:01 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 10:36:23 (10304): Preference change detected
2025-11-25 10:36:23 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 10:36:24 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 10:49:20 (10304): Preference change detected
2025-11-25 10:49:20 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 10:49:20 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 10:49:32 (10304): Preference change detected
2025-11-25 10:49:32 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 10:49:32 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 11:08:44 (10304): Preference change detected
2025-11-25 11:08:44 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 11:08:45 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 11:10:15 (10304): Preference change detected
2025-11-25 11:10:15 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 11:10:16 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 11:19:48 (10304): Preference change detected
2025-11-25 11:19:48 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 11:19:48 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 11:24:37 (10304): Preference change detected
2025-11-25 11:24:37 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 11:24:37 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 11:30:03 (10304): Preference change detected
2025-11-25 11:30:03 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 11:30:03 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 11:32:51 (10304): Status Report: Elapsed Time: '18000.000000'
2025-11-25 11:32:51 (10304): Status Report: CPU Time: '230.734375'
2025-11-25 11:38:21 (10304): Preference change detected
2025-11-25 11:38:21 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 11:38:21 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 11:40:21 (10304): Preference change detected
2025-11-25 11:40:21 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 11:40:22 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 11:41:41 (10304): Preference change detected
2025-11-25 11:41:41 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 11:41:42 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 11:52:18 (10304): Preference change detected
2025-11-25 11:52:18 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 11:52:18 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 12:21:32 (10304): Preference change detected
2025-11-25 12:21:32 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 12:21:32 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 12:30:25 (10304): Preference change detected
2025-11-25 12:30:25 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 12:30:25 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 12:33:42 (10304): Preference change detected
2025-11-25 12:33:42 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 12:33:42 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 12:33:54 (10304): Preference change detected
2025-11-25 12:33:54 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 12:33:54 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 12:47:46 (10304): Preference change detected
2025-11-25 12:47:46 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 12:47:47 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 13:08:44 (10304): Preference change detected
2025-11-25 13:08:44 (10304): Setting CPU throttle for VM. (100%)
2025-11-25 13:08:44 (10304): Setting checkpoint interval to 900 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 900 seconds))
2025-11-25 13:08:56 (10304): Powering off VM.
2025-11-25 13:08:57 (10304): Successfully stopped VM.
2025-11-25 13:08:57 (10304): Deregistering VM. (boinc_4151cb3aa7d30999, slot#10)
2025-11-25 13:08:57 (10304): Removing network bandwidth throttle group from VM.
2025-11-25 13:08:57 (10304): Removing VM from VirtualBox.
Hypervisor System Log:
64:09:07.762628 ERROR [COM]: aRC=E_ACCESSDENIED (0x80070005) aIID={e36a5081-a82a-40bd-9e4e-42a44d6ce50f} aComponent={MachineWrap} aText={The object functionality is limited}, preserve=false aResultDetail=0
64:09:07.762641 ERROR [COM]: aRC=E_ACCESSDENIED (0x80070005) aIID={e36a5081-a82a-40bd-9e4e-42a44d6ce50f} aComponent={MachineWrap} aText={The object functionality is limited}, preserve=false aResultDetail=0
64:09:07.765266 Saving settings file "C:\ProgramData\BOINC\slots\16\boinc_d62c9758dcb5061c\boinc_d62c9758dcb5061c.vbox" with version "1.19-windows"
64:09:07.770569 Finished saving settings file "C:\ProgramData\BOINC\slots\16\boinc_d62c9758dcb5061c\boinc_d62c9758dcb5061c.vbox"
64:09:08.046489 ERROR [COM]: aRC=E_ACCESSDENIED (0x80070005) aIID={e36a5081-a82a-40bd-9e4e-42a44d6ce50f} aComponent={MachineWrap} aText={The object functionality is limited}, preserve=false aResultDetail=0
64:09:08.046536 ERROR [COM]: aRC=E_ACCESSDENIED (0x80070005) aIID={e36a5081-a82a-40bd-9e4e-42a44d6ce50f} aComponent={MachineWrap} aText={The object functionality is limited}, preserve=false aResultDetail=0
64:09:08.046555 ERROR [COM]: aRC=E_ACCESSDENIED (0x80070005) aIID={e36a5081-a82a-40bd-9e4e-42a44d6ce50f} aComponent={MachineWrap} aText={The object functionality is limited}, preserve=false aResultDetail=0
64:09:08.049617 Saving settings file "C:\ProgramData\BOINC\slots\10\boinc_4151cb3aa7d30999\boinc_4151cb3aa7d30999.vbox" with version "1.19-windows"
64:09:08.055126 Finished saving settings file "C:\ProgramData\BOINC\slots\10\boinc_4151cb3aa7d30999\boinc_4151cb3aa7d30999.vbox"
64:09:17.850629 ERROR [COM]: aRC=E_ACCESSDENIED (0x80070005) aIID={e36a5081-a82a-40bd-9e4e-42a44d6ce50f} aComponent={MachineWrap} aText={The object functionality is limited}, preserve=false aResultDetail=0
64:09:17.850674 ERROR [COM]: aRC=E_ACCESSDENIED (0x80070005) aIID={e36a5081-a82a-40bd-9e4e-42a44d6ce50f} aComponent={MachineWrap} aText={The object functionality is limited}, preserve=false aResultDetail=0
64:09:17.850689 ERROR [COM]: aRC=E_ACCESSDENIED (0x80070005) aIID={e36a5081-a82a-40bd-9e4e-42a44d6ce50f} aComponent={MachineWrap} aText={The object functionality is limited}, preserve=false aResultDetail=0
64:09:19.766005 ERROR [COM]: aRC=E_ACCESSDENIED (0x80070005) aIID={e36a5081-a82a-40bd-9e4e-42a44d6ce50f} aComponent={MachineWrap} aText={The object functionality is limited}, preserve=false aResultDetail=0
64:09:19.766059 ERROR [COM]: aRC=E_ACCESSDENIED (0x80070005) aIID={e36a5081-a82a-40bd-9e4e-42a44d6ce50f} aComponent={MachineWrap} aText={The object functionality is limited}, preserve=false aResultDetail=0
64:09:19.766076 ERROR [COM]: aRC=E_ACCESSDENIED (0x80070005) aIID={e36a5081-a82a-40bd-9e4e-42a44d6ce50f} aComponent={MachineWrap} aText={The object functionality is limited}, preserve=false aResultDetail=0
64:09:19.768633 Saving settings file "C:\ProgramData\BOINC\slots\16\boinc_d62c9758dcb5061c\boinc_d62c9758dcb5061c.vbox" with version "1.19-windows"
64:09:19.773349 Finished saving settings file "C:\ProgramData\BOINC\slots\16\boinc_d62c9758dcb5061c\boinc_d62c9758dcb5061c.vbox"
64:09:20.057120 ERROR [COM]: aRC=E_ACCESSDENIED (0x80070005) aIID={e36a5081-a82a-40bd-9e4e-42a44d6ce50f} aComponent={MachineWrap} aText={The object functionality is limited}, preserve=false aResultDetail=0
64:09:20.057160 ERROR [COM]: aRC=E_ACCESSDENIED (0x80070005) aIID={e36a5081-a82a-40bd-9e4e-42a44d6ce50f} aComponent={MachineWrap} aText={The object functionality is limited}, preserve=false aResultDetail=0
64:09:20.057175 ERROR [COM]: aRC=E_ACCESSDENIED (0x80070005) aIID={e36a5081-a82a-40bd-9e4e-42a44d6ce50f} aComponent={MachineWrap} aText={The object functionality is limited}, preserve=false aResultDetail=0
64:09:20.377217 Saving settings file "C:\ProgramData\BOINC\slots\10\boinc_4151cb3aa7d30999\boinc_4151cb3aa7d30999.vbox" with version "1.19-windows"
64:09:20.384256 Finished saving settings file "C:\ProgramData\BOINC\slots\10\boinc_4151cb3aa7d30999\boinc_4151cb3aa7d30999.vbox"
64:09:20.757655 ERROR [COM]: aRC=E_ACCESSDENIED (0x80070005) aIID={e36a5081-a82a-40bd-9e4e-42a44d6ce50f} aComponent={MachineWrap} aText={The object functionality is limited}, preserve=false aResultDetail=0
64:09:20.757694 ERROR [COM]: aRC=E_ACCESSDENIED (0x80070005) aIID={e36a5081-a82a-40bd-9e4e-42a44d6ce50f} aComponent={MachineWrap} aText={The object functionality is limited}, preserve=false aResultDetail=0
64:09:20.757711 ERROR [COM]: aRC=E_ACCESSDENIED (0x80070005) aIID={e36a5081-a82a-40bd-9e4e-42a44d6ce50f} aComponent={MachineWrap} aText={The object functionality is limited}, preserve=false aResultDetail=0
64:09:20.759208 Platform architecture set to 'x86'
64:09:20.760301 ERROR [COM]: aRC=E_FAIL (0x80004005) aIID={e36a5081-a82a-40bd-9e4e-42a44d6ce50f} aComponent={SessionMachine} aText={This machine does not have any snapshots}, preserve=false aResultDetail=0
64:09:20.822598 ERROR [COM]: aRC=E_ACCESSDENIED (0x80070005) aIID={e36a5081-a82a-40bd-9e4e-42a44d6ce50f} aComponent={MachineWrap} aText={The object functionality is limited}, preserve=false aResultDetail=0
64:09:20.822638 ERROR [COM]: aRC=E_ACCESSDENIED (0x80070005) aIID={e36a5081-a82a-40bd-9e4e-42a44d6ce50f} aComponent={MachineWrap} aText={The object functionality is limited}, preserve=false aResultDetail=0
64:09:20.822657 ERROR [COM]: aRC=E_ACCESSDENIED (0x80070005) aIID={e36a5081-a82a-40bd-9e4e-42a44d6ce50f} aComponent={MachineWrap} aText={The object functionality is limited}, preserve=false aResultDetail=0
64:09:20.824059 Platform architecture set to 'x86'
64:09:20.825870 Saving settings file "C:\ProgramData\BOINC\slots\10\boinc_4151cb3aa7d30999\boinc_4151cb3aa7d30999.vbox" with version "1.19-windows"
64:09:20.830815 Finished saving settings file "C:\ProgramData\BOINC\slots\10\boinc_4151cb3aa7d30999\boinc_4151cb3aa7d30999.vbox"
64:09:21.266904 ERROR [COM]: aRC=E_ACCESSDENIED (0x80070005) aIID={e36a5081-a82a-40bd-9e4e-42a44d6ce50f} aComponent={MachineWrap} aText={The object functionality is limited}, preserve=false aResultDetail=0
64:09:21.266943 ERROR [COM]: aRC=E_ACCESSDENIED (0x80070005) aIID={e36a5081-a82a-40bd-9e4e-42a44d6ce50f} aComponent={MachineWrap} aText={The object functionality is limited}, preserve=false aResultDetail=0
64:09:21.266959 ERROR [COM]: aRC=E_ACCESSDENIED (0x80070005) aIID={e36a5081-a82a-40bd-9e4e-42a44d6ce50f} aComponent={MachineWrap} aText={The object functionality is limited}, preserve=false aResultDetail=0
64:09:21.267383 ERROR [COM]: aRC=E_ACCESSDENIED (0x80070005) aIID={e36a5081-a82a-40bd-9e4e-42a44d6ce50f} aComponent={MachineWrap} aText={The object functionality is limited}, preserve=false aResultDetail=0
64:09:21.267406 ERROR [COM]: aRC=E_ACCESSDENIED (0x80070005) aIID={e36a5081-a82a-40bd-9e4e-42a44d6ce50f} aComponent={MachineWrap} aText={The object functionality is limited}, preserve=false aResultDetail=0
64:09:21.267420 ERROR [COM]: aRC=E_ACCESSDENIED (0x80070005) aIID={e36a5081-a82a-40bd-9e4e-42a44d6ce50f} aComponent={MachineWrap} aText={The object functionality is limited}, preserve=false aResultDetail=0
64:09:21.267628 Saving settings file "C:\Users\micro\.VirtualBox\VirtualBox.xml" with version "1.12-windows"
64:09:21.272803 Finished saving settings file "C:\Users\micro\.VirtualBox\VirtualBox.xml"
64:09:21.273097 Saving settings file "C:\Users\micro\.VirtualBox\VirtualBox.xml" with version "1.12-windows"
64:09:21.278498 Finished saving settings file "C:\Users\micro\.VirtualBox\VirtualBox.xml"
64:09:21.281042 DeleteVM Saving settings file "C:\Users\micro\.VirtualBox\VirtualBox.xml" with version "1.12-windows"
64:09:21.292399 DeleteVM Finished saving settings file "C:\Users\micro\.VirtualBox\VirtualBox.xml"
VM Execution Log:
VM Startup Log:
VM Trace Log:
ess
Exit Code: 0
Output:
Waiting for VM "boinc_4151cb3aa7d30999" to power on...
VM "boinc_4151cb3aa7d30999" has been successfully started.
2025-11-25 06:32:42 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 06:43:21 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 06:43:43 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 06:47:30 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 06:53:27 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 07:01:45 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 07:21:12 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 07:21:24 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 07:21:36 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 07:24:05 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 07:28:32 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 07:36:28 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 07:44:33 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 07:44:44 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 07:44:55 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 07:52:13 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 07:52:37 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 07:54:26 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 07:54:48 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 08:13:11 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 08:13:22 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 08:28:54 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 08:29:41 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 08:35:23 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 09:27:23 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 09:27:35 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 09:29:17 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 09:31:00 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 09:31:24 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 09:37:47 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 09:46:15 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 09:48:21 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 09:50:58 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 10:24:33 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 10:29:41 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 10:36:01 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 10:36:24 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 10:49:20 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 10:49:32 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 11:08:45 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 11:10:16 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 11:19:48 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 11:24:37 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 11:30:03 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 11:38:21 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 11:40:22 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 11:41:42 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 11:52:18 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 12:21:32 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 12:30:25 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 12:33:42 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 12:33:54 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 12:47:47 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 13:08:44 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" cpuexecutioncap 100
Exit Code: 0
Output:
2025-11-25 13:08:57 (10304):
Command: VBoxManage -q controlvm "boinc_4151cb3aa7d30999" poweroff
Exit Code: 0
Output:
0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
2025-11-25 13:08:57 (10304):
Command: VBoxManage -q snapshot "boinc_4151cb3aa7d30999" list
Exit Code: -108
Output:
This machine does not have any snapshots
2025-11-25 13:08:57 (10304):
Command: VBoxManage -q bandwidthctl "boinc_4151cb3aa7d30999" remove "boinc_4151cb3aa7d30999_net"
Exit Code: 0
Output:
2025-11-25 13:08:58 (10304):
Command: VBoxManage -q unregistervm "boinc_4151cb3aa7d30999" --delete
Exit Code: 0
Output:
0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
2025-11-25 13:09:08 (10304): called boinc_finish(194)
</stderr_txt>
]]>
©2025 CERN