Name | CMS_1796868_1605825884.884124_0 |
Workunit | 2041977 |
Created | 19 Nov 2020, 22:44:49 UTC |
Sent | 22 Nov 2020, 20:00:45 UTC |
Report deadline | 29 Nov 2020, 20:00:45 UTC |
Received | 23 Nov 2020, 15:22:34 UTC |
Server state | Over |
Outcome | Computation error |
Client state | Compute error |
Exit status | 1 (0x00000001) Unknown error code |
Computer ID | 4170 |
Run time | 9 min 1 sec |
CPU time | 3 min 23 sec |
Validate state | Invalid |
Credit | 0.00 |
Device peak FLOPS | 3.93 GFLOPS |
Application version | CMS Simulation v50.00 (vbox64_mt_mcore_cms) windows_x86_64 |
Peak working set size | 71.97 MB |
Peak swap size | 59.06 MB |
Peak disk usage | 2.40 GB |
<core_client_version>7.16.11</core_client_version> <![CDATA[ <message> Unzul�ssige Funktion. (0x1) - exit code 1 (0x1)</message> <stderr_txt> 2020-11-23 13:20:31 (2880): Detected: vboxwrapper 26197 2020-11-23 13:20:31 (2880): Detected: BOINC client v7.7 2020-11-23 13:20:32 (2880): Detected: VirtualBox VboxManage Interface (Version: 6.1.12) 2020-11-23 13:20:33 (2880): Detected: Heartbeat check (file: 'heartbeat' every 1200.000000 seconds) 2020-11-23 13:20:33 (2880): Successfully copied 'init_data.xml' to the shared directory. 2020-11-23 13:20:34 (2880): Create VM. (boinc_60045e2e32fc164a, slot#32) 2020-11-23 13:20:34 (2880): Setting Memory Size for VM. (1896MB) 2020-11-23 13:20:35 (2880): Setting CPU Count for VM. (1) 2020-11-23 13:20:35 (2880): Setting Chipset Options for VM. 2020-11-23 13:20:35 (2880): Setting Boot Options for VM. 2020-11-23 13:20:35 (2880): Setting Network Configuration for NAT. 2020-11-23 13:20:36 (2880): Enabling VM Network Access. 2020-11-23 13:20:36 (2880): Disabling USB Support for VM. 2020-11-23 13:20:36 (2880): Disabling COM Port Support for VM. 2020-11-23 13:20:37 (2880): Disabling LPT Port Support for VM. 2020-11-23 13:20:37 (2880): Disabling Audio Support for VM. 2020-11-23 13:20:37 (2880): Disabling Clipboard Support for VM. 2020-11-23 13:20:38 (2880): Disabling Drag and Drop Support for VM. 2020-11-23 13:20:38 (2880): Adding storage controller(s) to VM. 2020-11-23 13:20:38 (2880): Adding virtual disk drive to VM. (vm_image.vdi) 2020-11-23 13:20:38 (2880): Adding VirtualBox Guest Additions to VM. 2020-11-23 13:20:39 (2880): Adding network bandwidth throttle group to VM. (Defaulting to 1024GB) 2020-11-23 13:20:39 (2880): forwarding host port 57056 to guest port 80 2020-11-23 13:20:39 (2880): Enabling remote desktop for VM. 2020-11-23 13:20:40 (2880): Required extension pack not installed, remote desktop not enabled. 2020-11-23 13:20:40 (2880): Enabling shared directory for VM. 2020-11-23 13:20:40 (2880): Starting VM using VBoxManage interface. (boinc_60045e2e32fc164a, slot#32) 2020-11-23 13:20:46 (2880): Successfully started VM. (PID = '11624') 2020-11-23 13:20:46 (2880): Reporting VM Process ID to BOINC. 2020-11-23 13:20:46 (2880): Guest Log: BIOS: VirtualBox 6.1.12 2020-11-23 13:20:46 (2880): Guest Log: CPUID EDX: 0x178bfbff 2020-11-23 13:20:46 (2880): Guest Log: BIOS: ata0-0: PCHS=16383/16/63 LCHS=1024/255/63 2020-11-23 13:20:46 (2880): VM state change detected. (old = 'PoweredOff', new = 'Running') 2020-11-23 13:20:46 (2880): Detected: Web Application Enabled (http://localhost:57056) 2020-11-23 13:20:46 (2880): Preference change detected 2020-11-23 13:20:46 (2880): Setting CPU throttle for VM. (100%) 2020-11-23 13:20:46 (2880): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 300 seconds) or (Vbox_job.xml: 600 seconds)) 2020-11-23 13:20:48 (2880): Guest Log: BIOS: Boot : bseqnr=1, bootseq=0032 2020-11-23 13:20:48 (2880): Guest Log: BIOS: Booting from Hard Disk... 2020-11-23 13:20:50 (2880): Guest Log: BIOS: KBD: unsupported int 16h function 03 2020-11-23 13:20:50 (2880): Guest Log: BIOS: AX=0305 BX=0000 CX=0000 DX=0000 2020-11-23 13:21:15 (2880): Guest Log: vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds 2020-11-23 13:21:15 (2880): Guest Log: vboxguest: misc device minor 56, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000) 2020-11-23 13:21:41 (2880): Guest Log: VBoxService 5.2.6 r120293 (verbosity: 0) linux.amd64 (Jan 15 2018 14:51:00) release log 2020-11-23 13:21:41 (2880): Guest Log: 00:00:00.000184 main Log opened 2020-11-23T12:21:40.507195000Z 2020-11-23 13:21:41 (2880): Guest Log: 00:00:00.000438 main OS Product: Linux 2020-11-23 13:21:41 (2880): Guest Log: 00:00:00.000478 main OS Release: 4.14.157-17.cernvm.x86_64 2020-11-23 13:21:41 (2880): Guest Log: 00:00:00.000509 main OS Version: #1 SMP Wed Dec 4 17:26:45 CET 2019 2020-11-23 13:21:41 (2880): Guest Log: 00:00:00.000538 main Executable: /usr/share/vboxguest52/usr/sbin/VBoxService 2020-11-23 13:21:41 (2880): Guest Log: 00:00:00.000539 main Process ID: 2960 2020-11-23 13:21:41 (2880): Guest Log: 00:00:00.000540 main Package type: LINUX_64BITS_GENERIC 2020-11-23 13:21:41 (2880): Guest Log: 00:00:00.001510 main 5.2.6 r120293 started. Verbose level = 0 2020-11-23 13:22:09 (2880): Guest Log: [INFO] Mounting the shared directory 2020-11-23 13:22:09 (2880): Guest Log: [INFO] Shared directory mounted, enabling vboxmonitor 2020-11-23 13:22:09 (2880): Guest Log: [DEBUG] Testing network connection to cern.ch on port 80 2020-11-23 13:22:09 (2880): Guest Log: [DEBUG] Connection to cern.ch 80 port [tcp/http] succeeded! 2020-11-23 13:22:09 (2880): Guest Log: [DEBUG] 0 2020-11-23 13:22:09 (2880): Guest Log: [DEBUG] Testing VCCS connection to vccs.cern.ch on port 443 2020-11-23 13:22:10 (2880): Guest Log: [DEBUG] Connection to vccs.cern.ch 443 port [tcp/https] succeeded! 2020-11-23 13:22:10 (2880): Guest Log: [DEBUG] 0 2020-11-23 13:22:10 (2880): Guest Log: [DEBUG] Testing connection to Condor server on port 9618 2020-11-23 13:22:10 (2880): Guest Log: [DEBUG] Connection to vocms0840.cern.ch 9618 port [tcp/condor] succeeded! 2020-11-23 13:22:10 (2880): Guest Log: [DEBUG] 0 2020-11-23 13:23:01 (2880): VM state change detected. (old = 'Running', new = 'Paused') 2020-11-23 13:24:29 (2880): VM state change detected. (old = 'Paused', new = 'Running') 2020-11-23 13:24:43 (2880): Guest Log: [DEBUG] Probing CVMFS ... 2020-11-23 13:24:44 (2880): Guest Log: Probing /cvmfs/grid.cern.ch... OK 2020-11-23 13:24:46 (2880): Guest Log: VERSION PID UPTIME(M) MEM(K) REVISION EXPIRES(M) NOCATALOGS CACHEUSE(K) CACHEMAX(K) NOFDUSE NOFDMAX NOIOERR NOOPEN HITRATE(%) RX(K) SPEED(K/S) HOST PROXY ONLINE 2020-11-23 13:24:46 (2880): Guest Log: 2.4.4.0 3744 1 25900 13769 3 1 1242487 4096001 2 65024 0 3 100 0 0 http://s1cern-cvmfs.openhtc.io/cvmfs/grid.cern.ch http://128.142.168.202:3126 1 2020-11-23 13:25:03 (2880): Guest Log: [INFO] Reading volunteer information 2020-11-23 13:25:03 (2880): Guest Log: [INFO] Volunteer: [SG]ATA-Rolf (50) 2020-11-23 13:25:03 (2880): Guest Log: [INFO] VMID: 49b2fac1-df25-48d2-a4ee-4612ca6a31f8 2020-11-23 13:25:05 (2880): Guest Log: [INFO] Requesting an X509 credential from LHC@home 2020-11-23 13:25:07 (2880): Guest Log: [INFO] Requesting an X509 credential from vLHC@home-dev 2020-11-23 13:25:09 (2880): Guest Log: [INFO] Running the fast benchmark. 2020-11-23 13:26:27 (2880): Guest Log: [INFO] Machine performance 6.64 HEPSPEC06 2020-11-23 13:26:27 (2880): Guest Log: [INFO] CMS application starting. Check log files. 2020-11-23 13:26:29 (2880): Guest Log: [DEBUG] HTCondor ping 2020-11-23 13:26:30 (2880): Guest Log: [DEBUG] 0 2020-11-23 13:34:29 (2880): Stopping VM. 2020-11-23 16:21:53 (12524): Detected: vboxwrapper 26197 2020-11-23 16:21:53 (12524): Detected: BOINC client v7.7 2020-11-23 16:21:54 (12524): Detected: VirtualBox VboxManage Interface (Version: 6.1.12) 2020-11-23 16:21:55 (12524): Detected: Heartbeat check (file: 'heartbeat' every 1200.000000 seconds) 2020-11-23 16:21:55 (12524): Starting VM using VBoxManage interface. (boinc_60045e2e32fc164a, slot#32) 2020-11-23 16:22:03 (12524): Error in start VM for VM: 1 Command: VBoxManage -q startvm "boinc_60045e2e32fc164a" --type headless Output: Waiting for VM "boinc_60045e2e32fc164a" to power on... VBoxManage.exe: error: The virtual machine 'boinc_60045e2e32fc164a' has terminated unexpectedly during startup with exit code 1 (0x1). More details may be available in 'D:\BOINC-Data\slots\32\boinc_60045e2e32fc164a\Logs\VBoxHardening.log' VBoxManage.exe: error: Details: code E_FAIL (0x80004005), component MachineWrap, interface IMachine 2020-11-23 16:22:03 (12524): VM failed to start. 2020-11-23 16:22:03 (12524): Could not start 2020-11-23 16:22:03 (12524): ERROR: VM failed to start 2020-11-23 16:22:03 (12524): Powering off VM. 2020-11-23 16:22:03 (12524): Deregistering VM. (boinc_60045e2e32fc164a, slot#32) 2020-11-23 16:22:03 (12524): Removing network bandwidth throttle group from VM. 2020-11-23 16:22:04 (12524): Removing VM from VirtualBox. Hypervisor System Log: VM Execution Log: VM Startup Log: VM Trace Log: Controllers: 1 Maximum ICH9 IDE Controllers: 1 Maximum IDE Port count: 2 Maximum Devices per IDE Port: 2 Maximum PIIX3 SATA Controllers: 1 Maximum ICH9 SATA Controllers: 8 Maximum SATA Port count: 30 Maximum Devices per SATA Port: 1 Maximum PIIX3 SCSI Controllers: 1 Maximum ICH9 SCSI Controllers: 8 Maximum SCSI Port count: 16 Maximum Devices per SCSI Port: 1 Maximum SAS PIIX3 Controllers: 1 Maximum SAS ICH9 Controllers: 8 Maximum SAS Port count: 255 Maximum Devices per SAS Port: 1 Maximum NVMe PIIX3 Controllers: 1 Maximum NVMe ICH9 Controllers: 8 Maximum NVMe Port count: 255 Maximum Devices per NVMe Port: 1 Maximum virtio-scsi PIIX3 Controllers: 1 Maximum virtio-scsi ICH9 Controllers: 8 Maximum virtio-scsi Port count: 256 Maximum Devices per virtio-scsi Port: 1 Maximum PIIX3 Floppy Controllers:1 Maximum ICH9 Floppy Controllers: 1 Maximum Floppy Port count: 1 Maximum Devices per Floppy Port: 2 Default machine folder: C:\Users\rolf_\VirtualBox VMs Raw-mode Supported: no Exclusive HW virtualization use: off Default hard disk format: VDI VRDE auth library: VBoxAuth Webservice auth. library: VBoxAuth Remote desktop ExtPack: Log history count: 3 Default frontend: Default audio driver: DirectSound Autostart database path: Default Guest Additions ISO: C:\Program Files\Oracle\VirtualBox/VBoxGuestAdditions.iso Logging Level: all Proxy Mode: System Proxy URL: 2020-11-23 16:21:55 (12524): Command: VBoxManage -q list hostinfo Exit Code: 0 Output: Host Information: Host time: 2020-11-23T15:21:54.880000000Z Processor online count: 16 Processor count: 16 Processor online core count: 8 Processor core count: 8 Processor supports HW virtualization: yes Processor supports PAE: yes Processor supports long mode: yes Processor supports nested paging: yes Processor supports unrestricted guest: yes Processor supports nested HW virtualization: yes Processor#0 speed: unknown Processor#0 description: AMD Ryzen 7 2700 Eight-Core Processor Processor#1 speed: unknown Processor#1 description: AMD Ryzen 7 2700 Eight-Core Processor Processor#2 speed: unknown Processor#2 description: AMD Ryzen 7 2700 Eight-Core Processor Processor#3 speed: unknown Processor#3 description: AMD Ryzen 7 2700 Eight-Core Processor Processor#4 speed: unknown Processor#4 description: AMD Ryzen 7 2700 Eight-Core Processor Processor#5 speed: unknown Processor#5 description: AMD Ryzen 7 2700 Eight-Core Processor Processor#6 speed: unknown Processor#6 description: AMD Ryzen 7 2700 Eight-Core Processor Processor#7 speed: unknown Processor#7 description: AMD Ryzen 7 2700 Eight-Core Processor Processor#8 speed: unknown Processor#8 description: AMD Ryzen 7 2700 Eight-Core Processor Processor#9 speed: unknown Processor#9 description: AMD Ryzen 7 2700 Eight-Core Processor Processor#10 speed: unknown Processor#10 description: AMD Ryzen 7 2700 Eight-Core Processor Processor#11 speed: unknown Processor#11 description: AMD Ryzen 7 2700 Eight-Core Processor Processor#12 speed: unknown Processor#12 description: AMD Ryzen 7 2700 Eight-Core Processor Processor#13 speed: unknown Processor#13 description: AMD Ryzen 7 2700 Eight-Core Processor Processor#14 speed: unknown Processor#14 description: AMD Ryzen 7 2700 Eight-Core Processor Processor#15 speed: unknown Processor#15 description: AMD Ryzen 7 2700 Eight-Core Processor Memory size: 16337 MByte Memory available: 8058 MByte Operating system: Windows 10 Operating system version: 10.0.19042 2020-11-23 16:21:55 (12524): Command: VBoxManage -q showvminfo "boinc_60045e2e32fc164a" --machinereadable Exit Code: 0 Output: name="boinc_60045e2e32fc164a" groups="/" ostype="Linux 2.6 / 3.x / 4.x (64-bit)" UUID="948aee07-774e-4f6c-ac24-bdcff2e87872" CfgFile="D:\\BOINC-Data\\slots\\32\\boinc_60045e2e32fc164a\\boinc_60045e2e32fc164a.vbox" SnapFldr="D:\\BOINC-Data\\slots\\32\\boinc_60045e2e32fc164a\\Snapshots" LogFldr="D:\\BOINC-Data\\slots\\32\\boinc_60045e2e32fc164a\\Logs" hardwareuuid="948aee07-774e-4f6c-ac24-bdcff2e87872" memory=1896 pagefusion="off" vram=8 cpuexecutioncap=100 hpet="off" cpu-profile="host" chipset="piix3" firmware="BIOS" cpus=1 pae="on" longmode="on" triplefaultreset="off" apic="on" x2apic="on" nested-hw-virt="off" cpuid-portability-level=0 bootmenu="messageandmenu" boot1="disk" boot2="dvd" boot3="none" boot4="none" acpi="on" ioapic="on" biosapic="apic" biossystemtimeoffset=0 rtcuseutc="off" hwvirtex="on" nestedpaging="on" largepages="on" vtxvpid="on" vtxux="on" paravirtprovider="default" effparavirtprovider="kvm" VMState="saved" VMStateChangeTime="2020-11-23T12:34:35.853000000" VMStateFile="D:\BOINC-Data\slots\32\boinc_60045e2e32fc164a\Snapshots\2020-11-23T12-34-29-898717500Z.sav" graphicscontroller="vboxvga" monitorcount=1 accelerate3d="off" accelerate2dvideo="off" teleporterenabled="off" teleporterport=0 teleporteraddress="" teleporterpassword="" tracing-enabled="off" tracing-allow-vm-access="off" tracing-config="" autostart-enabled="off" autostart-delay=0 defaultfrontend="" vmprocpriority="default" storagecontrollername0="Hard Disk Controller" storagecontrollertype0="PIIX4" storagecontrollerinstance0="0" storagecontrollermaxportcount0="2" storagecontrollerportcount0="2" storagecontrollerbootable0="on" "Hard Disk Controller-0-0"="D:\BOINC-Data\slots\32\vm_image.vdi" "Hard Disk Controller-ImageUUID-0-0"="f46fda86-1cb8-492e-98f7-e68d176aef11" "Hard Disk Controller-0-1"="none" "Hard Disk Controller-1-0"="C:\Program Files\Oracle\VirtualBox\VBoxGuestAdditions.iso" "Hard Disk Controller-ImageUUID-1-0"="d4f74d3c-39c5-4d66-8ede-6111226ccce8" "Hard Disk Controller-tempeject"="off" "Hard Disk Controller-IsEjected"="off" "Hard Disk Controller-1-1"="none" natnet1="nat" macaddress1="0800273D1DC4" cableconnected1="on" nic1="nat" nictype1="82540EM" nicspeed1="0" mtu="0" sockSnd="64" sockRcv="64" tcpWndSnd="64" tcpWndRcv="64" Forwarding(0)="tcp_57056_80,tcp,127.0.0.1,57056,,80" nic2="none" nic3="none" nic4="none" nic5="none" nic6="none" nic7="none" nic8="none" hidpointing="ps2mouse" hidkeyboard="ps2kbd" uart1="off" uart2="off" uart3="off" uart4="off" lpt1="off" lpt2="off" audio="none" audio_out="off" audio_in="off" clipboard="disabled" draganddrop="disabled" vrde="off" usb="off" ehci="off" xhci="off" BandwidthGroup0=boinc_60045e2e32fc164a_net,Network,1099511627776 SharedFolderNameMachineMapping1="shared" SharedFolderPathMachineMapping1="D:\\BOINC-Data\\slots\\32/shared" videocap="off" videocapaudio="off" capturescreens="" capturefilename="D:\\BOINC-Data\\slots\\32\\boinc_60045e2e32fc164a\\boinc_60045e2e32fc164a.webm" captureres="1024x768" capturevideorate=512 capturevideofps=25 captureopts="" description="CMS_1796868_1605825884.884124_0" GuestMemoryBalloon=0 2020-11-23 16:22:03 (12524): Command: VBoxManage -q startvm "boinc_60045e2e32fc164a" --type headless Exit Code: 1 Output: Waiting for VM "boinc_60045e2e32fc164a" to power on... VBoxManage.exe: error: The virtual machine 'boinc_60045e2e32fc164a' has terminated unexpectedly during startup with exit code 1 (0x1). More details may be available in 'D:\BOINC-Data\slots\32\boinc_60045e2e32fc164a\Logs\VBoxHardening.log' VBoxManage.exe: error: Details: code E_FAIL (0x80004005), component MachineWrap, interface IMachine 2020-11-23 16:22:03 (12524): Command: VBoxManage -q snapshot "boinc_60045e2e32fc164a" list Exit Code: -108 Output: This machine does not have any snapshots 2020-11-23 16:22:04 (12524): Command: VBoxManage -q bandwidthctl "boinc_60045e2e32fc164a" remove "boinc_60045e2e32fc164a_net" Exit Code: 0 Output: 2020-11-23 16:22:04 (12524): Command: VBoxManage -q unregistervm "boinc_60045e2e32fc164a" --delete Exit Code: 0 Output: 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100% 16:22:15 (12524): called boinc_finish(1) </stderr_txt> ]]>
©2024 CERN